BeamOn U3-E High Power
- Innovative High Power Beam Profiler (1/1.2″) based on advanced beam sampling in conjunction with high resolution camera.
- Integrated Filter Wheel.
- USB 3.0.
- Advanced software features.
- Measurement capability of a few kilowatts laser power.
Specifications
| Parameters | Value |
|---|---|
| Laser Type | CW & Pulsed |
| Beam width resolution | 1 micron or better |
| Beam Size | ⌀75 μm – ⌀6 mm |
| Spectral Response | 350 – 1350 nm (VIS NIR), 190-1350 nm (UV) |
| Resolution (H x V pixels) | 1900 x 1200 |
| Sensor Active Area (mm) | 11.34 x 7.13, sensor can be divided into multiple active areas, working in parallel for up to 400 sectors (NEW) |
| Gain Control | x1 – x400 |
| Dynamic Range | 60 dB , 16 bit |
| Exposure | 32 µsec to 2 sec |
| Frame Rate | 40 fps (8 bit) 30 fps (16 bit) AIO (64×40) 397 fps, AOI (120×80) 240 fps, AOI (240×160) 190 fps |
| Working Distance | 49 mm (contact factory) |
| Maximum BPP | Max. input angle – 25 deg. |
| Maximum power density | 1,000,000 W/cm² (contact factory) |
| Power measuring | With user’s pre-calibration at a selected point |
| Power range @900/1070 nm | CW 1-2500 W, Pulsed 1 – 1000 W |
| Output power from back side of beam sampler | 90% of input power. The Beam Sampler directs only a small portion of laser power for detector measurements. Most of the power exits according to drawing. |
| Cooling conditions | Filtered pressurized air of 6-8 Bar |
| Sensor type | CMOS – 1/1.2” format |
| Beam width accuracy | ±1.5% |
| Power accuracy | ±5% |
| Position resolution | 1 μm |
| Pixel Size | 5.86 µm x 5.86 µm |
| Background Subtraction | User activated |
| Synchronization | •Software trigger |
| Power Requirements | ~2 Watt (Via USB 3.0 interface) |
| Dimensions (L x W x H) in mm | 64 x 115 x 73.5 |
| Weight (typical) | 350 gr. |
| Min. Hardware Requirements | CPU i3 1.6 GHz, 4 GB RAM Min. Resolution 1366 x 766 |
| Interface | USB 3.0, Windows 8/10/11 (32 & 64 bit) |
| Mechanical Interface | Post mounting: 2 concentric opposite 8-32 UNC, 6 mm depth |
| Operating Temperature | 10° – 35° C |
The application program is compatible with Windows 7/8/10 OS (32 & 64 bit). For custom integration, an ActiveX package software is offered as standard.
Ordering Information
Model BeamOn U3E-HP-VIS NIR: A camera for 350 – 1310 nm with motorized built-in filter wheel with a set of 3xND filters in housing, USB3.0 cable, software and user manual on Flash Disk, carrying case.
Model BeamOn U3E-HP-UV NIR: A camera for 190 – 1310 nm with motorized built-in filter wheel with a set of 3xND filters in housing, beam sampler with filter drawer, USB3.0 cable, software and user manual on Flash Drive, carrying case, additional UV filter at position #1.
IR-Edge Filter: C-mount filter for IR Edge.