Duma Optronics

Camera Based Beam Profilers

BeamOn U3 Pro – E

Innovative Beam Profiler (1.1″) with integrated Filter Wheel.​

Basic Version without Filter Wheel also available.

The BeamOn U3 Pro-E, due to its special features, is actually a total measuring station for various laser beams.  

Its high resolution detector of 1.77 MegaPixels has 16 bit dynamic range and a spectral response of 350-1550 nm.

By a full set of attachments, the versatility of the device is greatly improved, allowing measurement of high and low power lasers as well as large and very small beams.

Advances in USB bandwidth provide a high refreshment rate of measured beam. For extreme power levels, a pressurized air-cooled beam sampler is easily attached to provide measurements of laser beams of a few kilowatts.

Specifications

Parameters Value
Laser Type  CW & Pulsed 
Beam Width Resolution  1 micron or better 
Resolution (H x V pixels)  1600 x 1100 (Global Shutter) 
Beam Size  ⌀100 μm – ⌀9 mm 
Spectral Response  350 – 1350 nm (VIS NIR),
190 – 1350 nm (UV)
*1550 – Contact Factory 
   
Sensor Active Area (mm)  14.5 x 9.9, sensor can be divided into multiple active areas, working in parallel for up to 400 sectors (NEW) 
Gain Control  User Selectable 
Dynamic Range  60 dB, 16 bit 
Exposure  32 µsec to 2 sec 
Frame Rate  40 fps (8 bit)
30 fps (16 bit)
AIO (64×40) 397 fps, AOI (120×80) 240 fps, AOI (240×160) 190 fps 
Pixel Size  9 µm x 9 µm 
Pixel Bit Depth  16 bits 
Beam width accuracy  ±1.5% 
Synchronization  •Software trigger 
Exposure & Gain Control  Programmable via GUI 
Accessories  -IR Edge Filter
-SAM3-C
-RDC
-C-Mount Filter 
Power Requirements  ~2 Watt (Via USB 3.0 interface) 
Housing Size (L x W x H) in mm  64 x 46 x 73.5 
Weight (typical)  300 gr. 
Min. Hardware Requirements  CPU i5 1.6 GHz, 8 GB RAM 
Interface  USB 3.0, windows 8/10/11 (32 & 64 bit) 
Mechanical Interface  Post mounting: 2 concentric opposite 8-32 UNC 6 mm depth at the detector plane
Optical attachments & filters: C-mount 
Built-in Automatic filter wheel  With mounted filters: ND8, ND200, ND1000, one unpopulated.
(UV Version comes with additional UV Bandpass Filter at position #1) 

The application program is compatible with Windows 8/10/11 OS (32 & 64 bit). For custom integration, an SDK package software is offered as standard.

Ordering Information

BeamOn U3 Pro-E: A camera for 350 – 1550 nm with motorized built-in filter wheel, USB3.0 cable 1.8 meters long,  application software on CD/Flash Disk, mounting post, 35 mm hood for ambient light obstruction, carrying case.

BeamOn U3 Pro-E-UV: A camera for 190 – 1350 nm with motorized built-in filter wheel, USB3.0 cable 1.8 meters long,  application software on CD/Flash Disk, mounting post, 35 mm hood for ambient light obstruction, carrying case, additional UV filter at position #1.

ND-Filters:  2mm thick ND filter in mount, select type.

IR Edge Filter:  2.5 thick, passing over 1100nm.SAM3-A:  Attachment for high power lasers attenuation (up to 20W).

SAM3-A-HP:  Attachment for high power lasers attenuation (up to 1kW)
RDC Attachment for beam reducer (ratio 2X1).

Inquiry Form